The list of the most famous Moscow telecommunication companies includes MGTS.
The abbreviation of this company stands for Moscow City Telephone Network.
The company is developing rapidly, and recently it has shown great success in the provision of services for organizing Internet access to its subscribers at high speeds: 3G / 4G networks.
The advantage of the company before users is that users can purchase a modern multifunctional router, which is very popular among subscribers for its high technical characteristics.
This company has been working in the field of telecommunications services for quite a long time, more than fifteen years.
But the provision of routers for distributing the Internet began not so long ago, in 2013. Even then, the company's routers were performing very well. And now the powerful performance of the router is not inferior, and often even surpass, the Internet devices of competitors.
A router (router) is a telecommunication device that provides subscribers with a connection to television, telephone communications, and also to gain access to the Internet.
The principle of operation of a router is based on the fact that it transmits a signal that it gives to connected devices.
The company has a wide range of routers for distributing a mobile network. Users can choose the model that suits them for successful use.
The company's routers have a surprisingly low cost, for which you can get Internet without restrictions.
The average speed of a company's Internet packet for a router can fluctuate from 30 Mbps to 200 Mbps.
In addition to services for the provision of the Internet, the company is engaged in the provision of telephone connection and television networks, with a large selection of TV channels.
So, two hundred television channels are available to users.
At the moment, one of the most popular models is the zte mf30 router. This model has the following advantages: reasonable price, high quality and great functionality.
The average cost of this router is approximately 2,100 rubles or more.
For this cost, users receive the following services and features:
Such technologies help to protect the network from the attacks of fraudsters. So, other users who do not know the password from your device will not be able to crack the protection and connect to the router.
Attention! In addition to the advantages that the router has a lot, it should be noted that it is not without its disadvantages. At the routerztemf30 is a weak battery with a capacity of 1500 mAh, which makes it possible to work without mains for about six hours.
The disadvantages also include a weak factory antenna, which cannot be amplified.
The external characteristics of the case and interface of this router meet the standards of all major routers on the telecommunications market.
The buttons for controlling the router are located on the side edges of the case, and the port for USB and charging is located at the bottom.
There are also 4 indicators on the router that indicate its working status:
Remember! The color of the last indicator indicates the status of reception and signal connection, as well as how the indicator is lit (constantly or blinking), indicates the network in which the user is working.
Another router from MGTS that is popular with users is Sercomm RV6688.
This model is used for home gateway module, GPON optical network.
It is not portable, but powered by an optical cable.
The router is small in size and looks like a simple device for distributing Wi-Fi.
Despite its simple appearance, this router has many functional characteristics.
The main function of this device is the application of modern technologies for high-speed data transmission over optical communication xPON.
The router also allows you to connect not only four computers in the local network, but also connect to the network via the Ethernet port (RJ 45), and several more memory drives (standard 2.0).
The router also allows you to organize the transmission of a video signal using a specialized IPTV technique.
This feature gives the user the chance to create four wireless networks at a time.
The router has two POTS connectors (RJ 11) that allow users to connect additional mobile devices, and also use IP-telephony together with other capabilities, while maintaining high quality of communication and high data transfer rate.
Should be clarified that despite the fact that the routers are imported, Russian users have a chance to take advantage of the following advantage: when installing the device, they have access to the factory firmware in Russian.
So, two presented routers from this Moscow company give free access to the network and in the form portable device, and in the form of an installed fixed router in the house.
Let's take a closer look at the process of connecting the previously presented routers. Some models have different technology and the ability to connect and install.
For example, to install a zte router, the user does not need any additional tools and provisions, since all the necessary programs are already in the device's memory.
Such a build of the router is very convenient when connecting.
The router software will be installed automatically; the subscriber only needs to connect the USB cable that is included with the router to the USB connector on the computer.
The operating system of the computer will first of all install the software drivers from the internal memory of the device itself.
Then the virtual media is detected on which the branded disk is installed.
Upon completion of loading from the internal memory of the device, the router is ready for use.
To prepare the MGTS zte router itself, you need to use the built-in interface of the device.
This is done after connecting the router to your PC, and after going to a special address. It is necessary to press the "Enter" button and open a menu with settings.
It will not be difficult to understand them, since the settings are designed for all subscribers. Even beginners will be able to set up their router with ease.
The menu will be divided into two settings sections: on the left there will be a hierarchical menu in which certain parameter settings are located.
In the center there is a transition to the bottom of the menu.
For example, to connect a router with the parameters of a wi-fi module, the user needs to go to the "WLAN" tab and open the "Basic" submenu.
The user must select the "Network" tab, then the transition to the settings of the main parameters is possible.
When connecting a Sercomm RV6688 router, the wizard performs the connection setup, because connecting this model is much more complicated than the previous one.
If you configure a router of this model yourself, then you need to connect the router to a computer or other device using a cable.
After that, you need to open a browser and type a specific address in the address bar, and go through it.
This will be followed by the opening of the settings menu, where you need to enter the following parameters:
Then a new window will open, in which the general characteristics are located.
On a note! If, when entering the data indicated above, an error message appears, then the user can enter the following data: password - mgts, login - mtsoao.
Upon successful completion of these actions, the opening of the data of the following characteristics will follow:
To execute wi-fi connection, the user must do the following:
By following these instructions, users will be able to configure the router themselves and access the Internet.
But, if you have any problems, you should contact a specialist who will help you correctly configure the router.
Users can purchase routers in the following ways:
MGTS provides users with a large selection of high-quality multifunctional devices for quick connection to the network.
Subscribers only need to choose a router model for themselves and perform a few simple operations to set up a connection.
The ZTE ZXA10 F660 router is a modern network equipment required to connect to the worldwide information network via a fiber-optic line (GPON technology). In terms of its functionality, it is both an ONT terminal and a Wi-Fi router, capable of distributing the Internet both via an Ethernet cable and wirelessly with an end device.
In addition to the standard features of the zxa10 f660 router, it also provides IP telephony and the ability to create a local Web server based on the router.
And this article presents step-by-step instruction on setting up a zte zxa10 f660 router from mgts, and also considered some of the subtleties of connecting this device.
The gpon ont zxhn f660 router is an economical mobile Wi-Fi transmitter with a main operating frequency of 2.4 GHz.
The functionality of the router provides Wi-Fi data transfer rates up to 300Mbps, while the device supports up to 4 SSIDs with 128 simultaneous connection of users to each network.
Also, the zte f660 router supports WPS mode, so the device can be used to expand the WiFi zone of another router.
On the back of the router there are:
The GPON connector for connecting a fiber-optic cable provided by the provider can be located both on the back and on the side of the zte f660 router.
1. Connect the power adapter (supplied with the device) to a 220V electrical outlet, and its plug into the socket on the rear panel intended for it.
2. Connect the green plug to the optical cable port and the other end to a power outlet.
3. Insert the plug of the patchcord (Ethernet cable) into one of the four LAN sockets, and its other end into the network card connector of the computer, from which the MGTS gpon zte zxa10 f660 router settings will be entered.
When the router is connected to a PC, the indicator corresponding to the active LAN connector should light up on the front panel of the device. If this does not happen, it is recommended on this computer.
Connection, testing and configuration of optical communication, as a rule, are carried out by specialists of the company-provider of communication services.
If you are installing the zte f660 optical modem by yourself, then call the service provider of the provider, ask to set up the equipment and follow the instructions of the specialist.
1. Launch any Internet browser installed on your computer and enter http://192.168.1.1 in the address bar.
In the field that appears, enter the login: admin, password: admin and enter the configuration interface of your device.
2. A menu with tabs will appear in the window that opens: “Status”, “Network”, “Security”, “Application”, “Administration”.
3. Go to the "network" tab, in the "WLAN" submenu and its subsection "Basic".
In the column "Wireless RF Mode" select the option "Enabled".
4. Click the "Submit" button, then go to the "Multi-SSID Settings" subsection.
In the “Choose SSID” box, select “SSID1”.
5. Press the "Submit" button again and go to the "Security" subsection.
- Here in “Choose SSID” select the first option.
The password must be unique and contain at least 8 Latin characters. It is not recommended to set standard and easy-to-guess passwords (for example, home address) in order to avoid unauthorized connections to your WiFi network.
To set a unique administrator password used to enter the settings of the MGTS gpon zte zxa10 f660 router, go to the Administration menu and the User Management submenu.
- Switch "User Right" to "Administrator".
Enter the old password in the “Old Password” field, and the new password in the “New Password” and “Confirm Password” fields.
It is also recommended to disable the WPS function before using the zte f660 router. To do this, press the corresponding button on the back of the device.
One of the most popular telecommunications companies in Moscow is MGTS.
The name of the company is deciphered as the Moscow City Telephone Network.
The last years of work show that the company is actively developing the direction of providing users with mobile Internet access (3G / 4G networks).
Also, the convenience of using the company's services lies in the fact that subscribers can purchase a router, which is popular for its multifunctional display and other functions.
It should be noted that the MGTS company has been working to provide Internet users for over 15 years.
The production of routers began only in 2013. But the routers from MGTS had very powerful indicators and to this day these indicators are not inferior to the market of Internet devices.
A router from MGTS is a subscriber device that is needed to connect to telephone communications, the Internet, and also to television.
The main function of a router is to transmit a signal to connect to an Internet device.
MGTS provides a large selection of routers for connecting to the Internet. Subscribers can independently choose the model they need, which is suitable for work.
So, MGTS for a small fee produces routers to which you can connect high-speed packages.
The minimum speed of one packet from the company is 30 Mbps, and the maximum speed is 200 Mbps.
You can check your internet speed
Also, connecting and purchasing a router from the MGTS company allows users not only to connect Internet services, but also telephone communications, a regular network for watching television.
Thus, subscribers can watch up to 200 or more channels.
To date, several models of routers from MGTS are used, we will consider the features of each.
This router combines a unique value for money, quality and functionality.
On the market, you can buy a router of this model starting from 2,100 rubles.
So, for such an amount, subscribers will be provided with the following functionality:
Attention! In addition to the positive aspects of the router, there are some disadvantages to consider. So, the zte mf30 router has a weak 1500 mAh battery, which allows the device to work without recharging for only 6 hours.
Also, the device has a weak built-in antenna without the ability to amplify it.
As for the case of the zte mf30, in terms of external characteristics and the location of the buttons, it is similar to the standard routers that are sold on the market.
So, on the side faces there are buttons for control, and at the bottom there is a port for USB and for recharging.
The device also has 4 indicators:
1. Battery charge;
2. Signal level;
3. Work;
4. Network mode.
It must be remembered that in the latter mode, when the indicator flashes red, then data will be transmitted from the 2G network. If it lights up red, it means that the user is registered in the 2G network.
If the indicator blinks green, it means that data is being transferred from the 3G network.
And if the green color on the indicator lights up constantly, the subscriber is successfully registered in the 3G network.
The model is quite old, but at the same time it has high access rights for an ordinary user. In fact, the device can be turned into a regular local server by replacing the correct files.
The router can use both Wi-Fi networks at once, this is both 2.4 GHz and 5 GHz. It should be borne in mind here that the speed will be maximum only at close range. From a distance of several meters, the speed begins to gradually decrease, so this option is not very convenient in large apartments, where you will have to buy another access point.
The main feature of this model is the increased WAN (the width of the communication channel with the operator). This allows you to use all connected services, such as television and telephony at the same time, without losing speed. The maximum speed of the Internet is 500 Mb / s, both for reception and output. This is one of the best routers for budget users.
This router is intended for the home gateway module, the GPON optical network.
That is, the user can install such equipment only in his apartment or house.
The dimensions of the router are small, so it resembles ordinary Wi-Fi.
But despite such a simple design, this router has very multifunctional characteristics.
The main function of the router is the use of modern optical communication technologies xPON.
Also, the device allows, in addition to connecting 4 computer networks or internal networks via the Ethernet port (RJ 45), to connect several flash drives (standard 2.0).
And also to implement video transmission using special IPTV technology.
This allows the subscriber to create 4 simultaneously wireless networks.
2 POTS ports (RJ 11) allow subscribers to connect additional telephones, as well as use IP-telephony together with other router functions, without losing the quality of communication.
It is worth noting, despite the foreign production of the router, at the time of installation, subscribers have the opportunity to use the proprietary firmware in Russian.
Thus, two modern routers from MGTS allow you to freely use the Internet as a portable router and a fixed router in an apartment.
The router can operate at both 2.4 GHz and 5 GHz. During installation, installers lay a fiber-optic cable to the router installation site, installing a separate outlet if necessary. They can also, if necessary, leave a network cable so that the user can independently connect a computer or set-top box.
An important feature of the router is its web interface. To access it, the user needs a web browser and Personal Area on the provider's website. But it has almost all the necessary functions, including fine-tuning the connection and connecting new devices.
Additional options and services can be connected to the user through a 2 mm optical cable used when installing the router. In addition to standard IPTV, it is possible to connect a burglar alarm, as well as a landline telephone, while maintaining its number.
Above were presented two popular routers from MGTS.
Now you need to consider in detail how to connect them, since there is a difference between connecting some router models.
So, when connecting a zte MGTS router, the subscriber does not need any additional disks, all software will be located in the internal memory of the router.
This unusual set of equipment is actually very convenient.
Since the user will only need to connect the included USB cable to one of the ports on the computer.
So, first operating system installs special storage device drivers.
In the next step, a virtual CD drive will be detected, with a disk already arranged in it.
The user only needs to run the installer software on your computer.
After the download is complete, the router will be completely ready for use.
In order to configure the zte MGTS router itself, you will need to go to the built-in equipment interface.
This can be done after connecting the router to the computer and switching to P 192.168.1.1. After that, you will need to press "Enter" and go to the settings menu.
It is impossible to get confused in the settings, since they are designed for ordinary users and even an inexperienced subscriber will be able to independently configure their equipment.
In the menu that opens, there will be two menus with settings: on the left side there will be a structural menu, where certain settings are located.
The central part of the window allows you to navigate down the menu.
So, for example, if we consider how to configure a MGTS wi-fi router for a wi-fi module, then the subscriber will need to select the "WLAN" section and go to the "Basic" submenu.
After that, a section with settings will be displayed, where several tabs will be located at the top.
The subscriber must switch to "Network" and only after that he can proceed to the basic settings.
In the case of connecting a Sercomm RV6688 router, you need to pay attention that the master should do the initial configuration, since the configuration of this router is much more complicated.
But if you independently configure the Sercomm RV6688 router, then you need to first connect to a computer or laptop using a connecting cable.
After connecting, you need to go to any convenient browser and go to the address bar: 191.168.1.254.
After that, a new window should open, where the general characteristics will open.
Attention! If after entering the above data an error appears, then the subscriber can enter the password in the column - mgts, login - mtsoao.
If everything is entered correctly, the following data will open before the user:
In order to set up WI-FI, the user must perform the following actions:
Thus, subscribers can independently make router settings and connect to the Internet.
In case of problems, you will need to call a wizard who can help you connect.
You can buy routers from MGTS in several ways:
1. On the official website of the company.
2. In the market for Internet devices. You can also look for MGTS branded stores, where any routers for work and connection to the network are sold.
3. In online stores. Only you need to choose very carefully, since no one will give guarantees for the quality.
Thus, the leading company MGTS allows subscribers to quickly and with high quality connect to the Internet, while using branded multifunctional routers.
The subscriber only needs to choose a suitable router and make simple connection settings.
Routers are usually made for some specific technology for connecting to the Internet, for example, routers for ADSL or GPON. What makes a GPON router different from the rest? What kind of technology is this anyway? How to set up such a router?
GPON stands for Passive Optical Networks (PON), and they are also gigabyte (G). Hence, the first feature of this connection method is the speed of 1 Gbps and higher. For comparison, we can say that even a speed of 100 Mbit / s is already more than enough for a very comfortable viewing of 4K video, playing online services (for example, World of Tanks) and for other tasks.
Another feature of GPON is the simultaneous connection to the Internet of not one, but ten or more users at once through one optical terminal (this is the name of a router that works with this technology).
Optical terminal converts a fiber optic interface provided by your provider to an Ethernet interface
An optical terminal converts a fiber optic signal into an Ethernet signal. The functionality of different ONTs may differ - from the minimum set of router functions to a full-fledged router (with IPTV, telephony, outputs for USB drives, etc.).
What else you need to know: it is unprofitable for providers to lay a solid fiber-optic cable from their station to the subscriber's apartment or house. To pay off the costs, the company divides the signal in some sections of the line. Optical splitters are used for division. These devices convert one fiber into several (three, five, nine, etc.). In the case of ETTH connection technology, for example, such devices were switches - in a different way switches: optical fiber was laid to the subscriber's house, and a standard copper cable was already to the subscriber's apartment.
| pros | Minuses |
| Large channel capacity - you can connect several services at once that will work efficiently (telephony, digital TV, high-speed "Internet"). | The fiber is very easy to bend - it is easy to damage it, so it is not laid throughout the apartment - the terminals are installed in the hallways. If they are laid, then under the skirting boards, and this is already more expensive in time and money. |
| If you have an alternative power source for the optical terminal when the power goes out (even throughout the city), you can access the internet. | If there are pets in the apartment, you need to hide the wires from them, since, again, they are thinner - the pet can easily gnaw through the cables. |
| There is no electrical voltage in optics - moisture will not affect it (within reasonable limits). | The cost of connecting fiber optic is quite high compared to other technologies. |
| High connection speed - we have already talked about it in the previous section. |
MGTS is one of the providers in Moscow that supplies Internet using GPON technology. Let us further consider setting up an optical terminal with the functions of a router, which this company provides its users. Model name - SERCOMM RV6688BCM.
First, you need to connect your computer to the terminal and enter the web shell with the device settings:
Now let's go directly to the setup itself:
Check the first item
Specify the name for the access point, channel, network standard
Create a guest network if needed
Video: how to set up a GPON SERCOMM router
If there are interruptions in the operation of the GPON router, the device may have an out-of-date firmware. To change it to a new one, you need to follow these steps:
Router MGTS GPON zte f660 is a new generation equipment used to connect to the World Wide Web. GPON technology indicates that the router is designed for fiber-optic connections. The device can exchange data both via cable and using a Wi-Fi signal. The uniqueness of the equipment lies in the fact that in addition to access to the Internet, the router is able to provide its owner with IP-telephony and allows you to create a local web server.
Today we will consider the features of the router, along the way discussing how to configure the MGTS GPON zte f660 Router in order to use the declared functions.
If we consider the main characteristics of the f660, it should be noted that the transmitter operates at an operating frequency of 2.4 GHz. The Wi-Fi signal can be transmitted at a speed of up to 300 megabits / second, and the equipment supports up to 4 network identifiers, which can support the connection of about 120 users at the same time. Also, the router is designed to increase the range of signals from nearby routers.
If we talk about the design of the device, it provides for the following connectors:
Also, the back side of the router is equipped with on / off buttons for the device, buttons for resetting all settings and adjusting the Wps / Wlan functions, plus a GPON connector for a fiber-optic connection. As you can see, the functionality of the device is quite high.
In order to start using the device, it is necessary to correctly connect it to the equipment and ensure its connection to the fiber optic lines. Introducing you step by step guide by connection:
If the light is off, make sure the network card is working, and then try again. If you have any additional difficulties, contact the technical service of the provider, specialists will help you connect and test the connection with detailed instructions.
After the equipment is operational and access to the World Wide Web is possible through a home, wired network, it is necessary to set up data exchange via the Internet via Wi-Fi.
If you want to change the administrative access to the settings of your router, enter the user management subsection. The window that opens will ask you to confirm the username and the old password, after which you can fix and save the new administration access code. The steps described will help you secure your Wi-Fi network and avoid unauthorized connections (video below).
We examined how to connect and configure the MGTS GPON zte f660 router. If your devices are functional and ready for use, the described manipulations should not cause difficulties.
Watch the video - how to change the password for Wifi (zte F660v3).
