How to set a password on a Windows 7 system. How to set a password on a computer with any version of Windows. Other ways to protect your laptop with a password

Many PC users are concerned about their data and want to install protection on their account. Then they have a question about how to set a password on the computer. Today we will look at this issue in detail.

What does the password do?

Probably, the question will immediately arise whether there is any point in protecting your account. Of course have. For example, if you have many users at home, but only one computer, it’s definitely worth creating each one’s own account in the system and putting a code so as not to interfere with each other and keep all important files safe.

However, keep in mind that this is not the best protection and is easy to bypass. In search engines you can find many solutions on how to log into a password-protected Windows account.

Setting a password

Now, in fact, let’s move on to how to set a password on a computer step by step. We will look at the example of two operating systems - Windows 7 and 10. They are very popular lately.

Windows 7

Let's start with a younger version of the Windows operating system. It’s easy to install a security code on it:

Go to menu Start and open Control Panel.

There we are interested in the section "User accounts".

You should click on the link "Change Windows Password".

Now to set the secret code, click on the inscription: “Creating a password for your account”.

Next, you need to enter the code twice, as well as some word or numbers, as a hint if the code is lost or forgotten.

Here's how to set a password on a Windows 7 computer. The instructions are quite simple, and even a “teapot” can handle it.

Windows 10

Now let’s write down instructions on how to set a password on a Windows 10 computer:

Find out the Windows password

Some people are interested in how to find out the password set on the computer. This cannot be done, but you can reset the security code.

Resetting the password on Windows 10

To do this, we need a flash drive with a recorded distribution of this operating system. If it is, then:

Boot from a USB drive.
In the installer window you need to click "System Restore".
A window will appear with various actions. Click on "Diagnostics".
There you need to choose "Extra options".
Next you should click on "Command line".
Then you need to make a copy of it. To do this, you need to enter the command copy D:\Windows\system32\cmd.exe D:\Windows\system32\sethc.exe /Y .
A message will then appear notifying you that the file has been copied. You need to reboot the system.
Now you need to press the key about 5-6 times SHIFT when the OS asks you to enter the code.
In the command line that opens, enter net user admin2 /add .
Then we register net localgroup Administrators admin2 /add to make the new account an administrator.
After this, you need to restart the computer system and log into Windows through a second account and delete the code on the old one.

You can use a password to restrict access to your computer in the Windows operating system. The password is entered during boot and cannot be bypassed by any simple means. If there are several users on the computer, then a password will need to be set for each, since otherwise there will be a loophole for entry. Using the Windows 7 operating system as an example, let's look at the procedure for creating a password:

Open the settings window
	Click on the Start button and open Control Panel.
	In the list that appears, we are interested in the item Adding and removing user accounts. Click on it.
	A window will open with a list of all computer users. Click on the username for which you need to set a password. If there are several users, then a similar procedure will need to be done for each.

	The window that opens displays a list of actions that can be performed with this account. Click on the line Create a password.
Setting a password
	The new password must be entered twice to avoid mistakes, and then a mandatory hint must be entered in case the password is forgotten. After this, you need to click on the Create password button.

A login password is a good way to protect important files from strangers. This article will help you set or remove a password for logging into the system, as well as completely reset it if you forgot it using a special flash drive.

Setting a password on Windows 7

Even a simple combination of numbers is a guarantee that very young family members or work colleagues will not have access to information that is important to you. Creating a password is not difficult - the OS itself will help us with this.

First you need to turn on your computer and log into your account, which you need to protect with a password. To set a password, you need:

Go to menu "Start" → click on the user icon (a window will open "User accounts" );

Figure 1. Click on the user icon.

In the window that appears, select the item “Creating a password for your account” → install password, re-enter it in the column "Password confirmation" , come up with and write down “Password hint” → save changes with a click of a button "Create a password" ;

Figure 2. Enter a new password.

Restart your computer to make sure the steps are correct.

Ready.

These two simple steps will help protect your files.
If you want to change or remove your password, please read the next chapter. Be prepared that in order to reset your password, you may need to spend a lot of time at the computer, and you may also need special equipment.

Password reset with proper skills available.

Therefore, if you are seriously concerned about the safety of your information, set a password on the BIOS. Instructions can be found in the chapter "".

Change or delete your account password (if you remember it)

These actions are no more complicated than those described in the previous chapter.
We will consider two situations: when you remember the password (further in the text), and when you forgot it (see chapter).

To remove or change the secret code, you need to:

Enter "Start" → click on the icon (located in the upper right corner above the name of the current account);
Now in the window "User Accounts" select the item you need: "Change…" or "Deleting your password" ;
Settings will open with fields that need to be filled out. You need to enter a new password, a confirmation hint for it (or the old one, if you are deleting it) → click on the button "Change password" (or "Remove password") .

Figure 3. Changing/removing the password.
Ready.

Now it is advisable to write down the new password and save it in a safe place. After reading this chapter, questions might arise if:

You have completely forgotten your password and want to view it or delete it;
You are looking for a more reliable way to protect your data than standard means.

Then check out the chapters that provide instructions on how to recover your password (even if you have forgotten it) and “Bonus” with installation steps.

Complete password removal on Windows 7

This chapter contains information on completely resetting the password for absolutely any account.

For this you will need flash drive and a working (with the ability to log into the OS) computer. Attention!
All further actions must be agreed upon with the owner of the account/computer.Let's begin.

Step 1. Preparing a flash drive.

First you need to clean the drive.

To do this in the folder "My computer" you need to right-click on the flash drive and select “Format...” → file system: « FAT 32" → "Begin" .

Wait for the process to complete.
Figure 4. Formatting our flash drive.
Step 2. Download the required program to reset your password.

Everything is simple here: (archive is attached at the end of the article) → unpack to any convenient place → copy files to the root of the flash drive.

Step 3. Assign the status of the drive to boot.

This can be done using standard system tools - using command line (CMD) .

To do this you need:

Open "Start" → enter the query in the search bar: “cmd” → open the corresponding item using the right mouse button (required!) → “Run as administrator” (a black command console will launch);

Figure 5. Open the command console with administrator rights.

Next you need to enter the command: "G: syslinux. exe- maG:» (instead of “G” in both cases, use the letter of your flash drive, which can be found in the window "My computer");
The operation must take place no mistakes. You can now close the command prompt. If errors still occur, repeat the steps starting from "Step 1".

Figure 6. We get a seemingly “zero result.”
Step 4. We start the computer from a bootable USB flash drive. Executing this step depends in part on your motherboard/laptop model. We need to set our drive to priority in Setup Menu (BIOS) or Boot Menu→ turn off the computer on which we plan to recover the password and:

Enter BIOS by pressing the F1/F2/F12/Delete button (depending on the motherboard);

If you don't know how to enter the BIOS on your computer or laptop, then...

Go to tab « Boot » (navigation is carried out using arrows on the keyboard);
Install the bootable USB flash drive yourself first in line « Boot priority ( order )» / « Boot device priority »
Save changes to tab « Exit » (« Save & Exit ») selecting an item « Exit Saving Changes » → confirm by pressing « Yes » .

The computer should automatically boot from the flash drive

Step 5. Removing the password.

First, you need to wait until the program is completely loaded (time 2 minutes if you are not sure). Enter the following commands sequentially without quotes(relevant for most users):
The following steps are also suitable for resetting the administrator password.

Click « Enter » ;
"C:\Windows\System32\config" – access to the register;
"Password Reset » – launching a complete password removal script;
Enter Username whose password needs to be reset;
« Clear User Password » – clearing the password from the registry
«!» – just an exclamation point;
Press a key on the keyboard "Y" .

Now you need to restart your computer if this does not happen automatically. The login password will disappear and you will be able to continue using the OS. Don't forget to write down the new combination on a piece of paper to avoid similar troubles in the future. The following is information about the most reliable (standard, of course) method of keeping data on a computer practically invulnerable to hacking - installing protection in the BIOS.

Bonus. Setting a BIOS password

This password cannot be reset using a regular bootable USB flash drive. To remove this type of protection, you need to “examine” the computer hardware. Extract only CMOS can restore BIOS to factory settings (including clearing the password) if you forget the data from entering the Setup Menu of the computer. To install such protection, you need:

Go to BIOS(this is done by pressing the F1/F2/F12/Delete button);
Find by tabs (usually « Security» or « Main» ) paragraph « Set User Password » (or « Bios Setting Password» ) → select by pressing the key « Enter » ;
Enter a new password → « Enter » .

Figure 7. Create a new password.

The protection is now installed only to enter the BIOS, and you need to make sure that the password is requested every time you start the computer. To do this, you need to find the item in the menu « Password Check » → set its value to “Always”;
Save your password by selecting « Save and Exit Setup » (can be located either in the general tab or in « Exit » ).

Ready.

The most secure protection is installed. Without access to the BIOS, outsiders will be able to do literally nothing. Be sure to write down your password so you don't accidentally forget it, and put it in a safe place.

In the modern world, data protection is one of the main factors of cybersecurity. Fortunately, Windows provides this option without installing additional software. The password will ensure the safety of your data from strangers and intruders. The secret combination becomes especially relevant in laptops, which are most often subject to theft and loss.

The article will discuss the main ways to add a password to a computer. They are all unique and allow you to log in even using your Microsoft account password, but this protection does not guarantee 100% security against unauthorized access.

Method 1: Adding a password in the Control Panel

The password protection method through the “Control Panel” is one of the simplest and most frequently used. Perfect for beginners and inexperienced users, it does not require memorizing commands or creating additional profiles.

Press "Start Menu" and click "Control Panel".

Select a tab "User Accounts and Family Safety".

Click on "Change Windows Password" In chapter "User accounts".

From the list of profile actions, select "Create a password".

In the new window there are 3 forms for entering basic data that are necessary to create a password.

Form "New Password" is for a code word or expression that will be requested when the computer starts, pay attention to the mode "Caps Lock" and the keyboard layout when filling it out. Don't create very simple passwords like "12345", "qwerty", "ytsuken". Follow Microsoft's recommendations for choosing a private key:
- The secret expression cannot contain the user account login or any of its components;
- The password must consist of more than 6 characters;
- It is advisable to use uppercase and lowercase letters of the alphabet in the password;
- It is recommended to use decimal digits and non-alphabetic characters in the password.

"Password confirmation"— a field in which you need to enter a previously invented code word in order to eliminate errors and accidental clicks, since the entered characters are hidden.

Form "Enter a password hint" designed to remind you of your password if you can’t remember it. Use data known only to you in the hint. This field is optional, but we recommend filling it out, otherwise there is a risk of losing your account and access to your PC.

When you have filled in the required information, click "Create a password".

At this stage, the password setting procedure is completed. You can view the status of your protection in the account changes window. After reboot, Windows will require a secret expression to log in. If you have only one profile with administrator privileges, then without knowing the password, it will be impossible to gain access to Windows.

Method 2: Microsoft Account

This method will allow you to access your computer using your Microsoft profile password. The code expression can be changed using an email address or phone number.

Find "Computer Settings" in standard Windows applications "Start Menu"(this is how it looks on 8, in Windows 10 you can access "Parameters" can be done by pressing the corresponding button in the menu "Start" or by using a keyboard shortcut Win+I).

From the list of options, select a section "Accounts".

In the side menu, click on "Your Account", Further "Connect to a Microsoft account".

If you already have a Microsoft account, enter your email, phone number or Skype username and password.

Otherwise, create a new account by entering the requested information.

After authorization, confirmation with a unique code from SMS will be required.

After all the manipulations, Windows will ask you for your Microsoft account password to log in.

Method 3: Command Line

This method is suitable for more advanced users, as it requires knowledge of console commands, but it can boast of fast execution.

Conclusion

Creating a password does not require special training or special skills. The main difficulty is coming up with the most secret combination, not setting it up. However, you should not rely on this method as a panacea in the field of data protection.

Setting a password for the Windows operating system is an important step when organizing protection against data leakage. In addition, any user restrictions regarding access to data automatically become restrictions for viruses, as they prevent their spread. The sequence of actions for organizing protection for different versions of Windows OS is similar, but nevertheless there are some differences. In addition to instructions on how to set a password on a Windows XP, 7, 8, 10 computer, in this instruction you can find information on protecting the BIOS and individual files.

Windows XP protection

Password on Windows XP installed in section Control panels PC « user accounts" Let's consider the sequence of actions:

After this, all attempts to log into the custom account will lead to the appearance of an input dialog for the specified sequence.

Windows 7 protection

The answer to the question of how to put Windows 7 password, is quite simple:

After the next exit from the PC operating system, an attempt to boot it under the control of this user will result in an authorization dialog appearing.

Windows 8 protection

The problem of how to set a password on Windows 8 is solved somewhat differently:

Windows 10 protection

Now let's look at how to set a password on Windows 10. This task can be solved in just four steps:

Windows Phone Protection

Setting up protection on a smartphone running Windows is not as easy as setting a password on Windows 10 for PC, but carefully following these steps will solve this problem:

It is important to understand that too small a value will prevent you from using the phone comfortably, and too large a value will negatively affect the reliability of the protection. Recommended length is 8–10 characters.

BIOS protection

The question often arises of how to set a password on a computer without logging into Windows 7, 8 or 10. This opportunity is provided by BIOS. The main advantage of using it to organize protection is that the user must enter the code sequence immediately after turning on the computer, and only a hardware reset of the BIOS will help an attacker bypass the lock.

Activating password login begins with entering the BIOS. To do this, press the Del key immediately after turning on the PC. Perhaps your BIOS version uses a different key for this, but in any case it should be indicated on the computer startup screen. There are many BIOS versions, but the names of the main sections are the same in almost all of them.

Let's look at the sequence of actions to set a password:

Locking shortcuts

Many users of desktop operating systems have a question about how to put a password on a shortcut or folder. There are many solutions to this problem, since in these cases you should use external programs such as LocK-A-FoLdeR, WinRaR, Folder Lock.

Bottom line

So, in this article we have studied in detail how to set a password on a Windows 10 computer, as well as on computers or laptops with previous versions: 7, 8 and XP. We looked at the procedure for installing protection on Windows Phone. They also showed how to install protection at the very beginning of booting your PC when starting the BIOS. We hope you find this article useful.