The admin account gives the user full control over the computer. In this case, there is full access to all system folders, files that are located on the computer. It becomes possible to make changes that affect other users of the computer. You can change security settings, set software and equipment.
By default, in Windows 10, this account is inactive and is not displayed when a user is selected. To sign in with these rights, you must have an account of this type on your computer. Your type account can be checked after logging in.
If your account type is not an administrator, then you will not be able to log in with his rights if you do not know the username and password of the account on the computer.
You can use the Local Security Policy utility. For a quick login, you can use the command line by typing "secpol.msc". You can open the standard way by clicking the Start menu, selecting the "Control Panel", then "Administrative Tools".
In the window that opens, you need to open the "Local Policies" branch, select the "Security Settings" item and on the right, in the policies, select the following item: "Accounts:" Administrator "state. You will need to double-click on it and enable the account. The rights will be granted and at startup it will be possible to log in as an administrator. 
You can enter the system with administrator access with unlimited capabilities through the "Local Users and Groups" utility. You will need to run the "lusrmgr.msc" command from the command line. Then expand the "Users" section to see all users that are on the PC. 
If the admin account has been deleted, then it will not be possible to restore it using the described methods. These recovery methods are suitable only if you do not have access to your account, for example, you forgot your password. Then you can give your current account admin rights.
In this case, it is recommended to use System Restore.
The first method is to open the "Control Panel" from the Start menu. Then select the "Recovery" section, then "Start System Restore". After the actions taken, the "System Restore" window will open, where you will need to click "Next". All will be available possible points restores to which you can return / roll back, including the one where the admin account was still.
If this method does not help, then you can try another method.
To do this, you need a disk or flash drive with the desired OS. When the system boots, go into safe mode (pressing "F8"), then select "Troubleshoot computer problems". The Recovery Options window will open. Windows systems ten". You will need to boot from the drive and select "System Restore". After that, the OS will be updated, the administrator account will be created anew. In this case, the files will not be touched, they will be saved in their places.
Almost everyone knows that in the latest versions of Windows both an ordinary user with incomplete access to some settings and the administrator himself have limited rights. Because of this, sometimes there are many problems with starting programs or setting system parameters. Read on to learn how to get administrator rights in Windows 10. Several simple methods are proposed for consideration that allow you to bypass almost all restrictions on access to certain functions of the system. However, I immediately want to warn all users that the developers operating system it was not in vain that they introduced rather strict restrictions in terms of the security of access to some functions of the OS itself, so some decisions will have to be made, as they say, at your own peril and risk (you never know what system settings you want to change later).
To get started, let's look at a few of the simplest ways to launch custom applications or system settings, which almost everyone knows about. But they cannot be ignored either. So, let's begin.
For example, almost any program can be launched with administrator rights through the PCM on the icon with the selection of the corresponding line. At the same time, if the program is present in the list of the "Start" menu, through the PCM and the "Advanced" line, you can use the appropriate launch.
The fact that the system sometimes issues requests for permission to start some applications (for example, those that do not have an appropriate certificate of authenticity or are questioned by the security system in terms of unwanted presence), many users are unspeakably annoyed. Therefore, the majority also wants to make sure that these requests do not appear.
For the selected program, you need to open the properties of the shortcut (via PCM), and by clicking the "Advanced" button, set the permanent launch of the program with administrator rights without any requests for permission.
Another technique is to call first command line on behalf of the administrator and write in it the name of the application being launched. But this, as is already clear, is somewhat inconvenient and, by and large, simply duplicates the first two methods.
But suppose that the user has limited powers, and he needs to log in exactly as an administrator in order to perform all the necessary actions, so to speak, without asking permission from the system.
To do this, again, use the command Windows string 10 with administrator rights, the combination net user Administrator / active: yes is written in it, after which the system will be logged in under the administrator, and on an ongoing basis (meaning the account registration for which the corresponding activation command was executed).
Basically, you can grant administrator rights in Windows 10 to any registered account. Such settings can be made through the parameters menu and the corresponding section "accounting".
Here you need to select the family item and for the selected registration record press the button to change it, after which a form will appear in which you just need to set the appropriate type from the list. After saving the changes, all restrictions will be removed.
Also, administrator rights in Windows 10 can be assigned through security policies. The editor is called through the Run console using the secpol.msc command.
Here, through the local policies, you need to go to the security settings, and in the accounts on the registration state, activate the local security setting by checking the "Enabled" line. In other words, after performing such actions, the user automatically becomes an administrator.
There is another technique that allows you to get administrator rights. In Windows 10, the manager for managing local users and groups can be used for this, which can be invoked through the Run menu using the lusrmgr.msc command.
In the editor, you need to go to the users section, and then find the administrator entry, after which, having entered the settings, on the general settings tab, disable it. After that, you can log in to the system as the user for whom the listed actions were performed, with a full set of access rights.
It remains to add that in some cases you can use adding users to the administrator group, but this, rather, applies only to local settings and, by and large, does not cancel the powers of the so-called super-administrator, which is exactly what we are talking about.
But which of the above is the preferred methodology for making the appropriate changes? It seems that in the simplest case, you need to initially activate the login under the administrator, although sometimes it is enough to set automatic launch under the administrator for the selected programs.
Running programs on behalf of the administrator gives only one-time privileges and looks rather inconvenient. You can remove restrictions on starting applications only if the user is sure of their safe origin (even if they do not have a certificate).
But it is not recommended to disable the administrator record unnecessarily, because after changing some system parameters with deactivated permission, you can finish badly so that the whole system becomes unstable or refuses to work at all. So before making a decision, think a hundred times how appropriate all these actions will be.
As with previous versions of the OS, Windows 10 has a hidden built-in Administrator account, hidden and inactive by default. However, in some situations it can be useful, for example, when it is impossible to take any action with the computer and create a new user, to reset the password, and more. Sometimes, on the contrary, you need to disable this account.
This instruction details how to activate the hidden Windows 10 Administrator account in various situations. It will also cover how to disable the built-in administrator account.
In general, to disable the built-in administrator account, it is enough to run the command line in the same way as described in the first part of the manual, and then enter the same command, but with the key / active: no(those. ).
However, a situation that has often been encountered recently is when such an account is the only one on the computer (perhaps this is a feature of some unlicensed versions of Windows 10), and the reason why the user wants to disable it is partially not working functions and messages like “Microsoft Edge cannot be opened using the built-in administrator account. Log in with a different account and try again. "
Note: before performing the steps described below, if you have worked under the built-in administrator for a long time, and you have important data on the desktop and in the system folders of documents (images, videos), transfer this data to separate folders on the disk (it will be easier then place them in the folders of the "regular", not the built-in administrator).
In this situation, the correct way to solve the problem and disable the built-in Windows 10 administrator account would be the following:
In this case, the built-in administrator account will be disabled, and you can use a regular account, also with the necessary rights and without restriction of functions.
And the last possible option is that logging into Windows 10 is impossible for one reason or another and you need to activate the Administrator account in order to take steps to correct the situation.
In this context, there are two most common scenarios, the first of which is that you remember your account password, but for some reason you do not log into Windows 10 (for example, after entering the password, the computer freezes).
In this case, a possible way to solve the problem would be as follows:
And the second scenario is when the password for logging into Windows 10 is unknown, or, according to the system, is incorrect, and logon is impossible for this reason. Here you can use the instruction - the first part of the instruction describes how to open the command line in this situation and perform the necessary manipulations to reset the password, but in the same command line you can activate the built-in Administrator (although this is not necessary to reset the password).
It seems that this is all that can come in handy on the indicated topic. If some of the problem options were not taken into account by me, or the instructions cannot be used, describe what exactly is happening in the comments, I will try to answer.
The Administrator account gives the user full control over the computer, including full access to all system folders. However, while using this account, UAC is disabled and does not display warning messages.
By default, in Windows 10, the Administrator account is not active and is not displayed when a user is selected. In this article, we will explain how to activate this account and how to use it to log into Windows 10 as an Administrator.
Step # 1. Run Command Prompt with Administrator rights.
In order to log into Windows as an Administrator, you first need to activate the Administrator account. And for this you need.
In order to do this, first press the key combination Windows + X and in the menu that opens, select "Command Prompt (Administrator)".
A User Account Control (UAC) warning popup will then appear. In this window, click on the "Yes" button.
Thus, you will run the command line with Administrator rights. Now, using this command line, you can run a command that activates the Administrator account in Windows 10.
Step # 2. Activate the Administrator account.
So, after the command line is open, you can activate the Administrator account. To do this, in the command line, you need to run the command “ net user administrator / active: yes". If you have an English version of Windows 10, then this command will look like this "net user administrator / active: yes".
After the message "Command completed successfully" appears in the Command line, you can close the Command line.
Step # 3. Log in to Windows 10 as Administrator.
After activating the Administrator account, you can log into it like any other account on the computer. To do this, you need to click on the "Start" button, and then click on the username in the upper left corner of the "Start" menu and select "Administrator".
After that, it will appear standard screen to log into your account, and in order to log into Windows 10 as an Administrator, you just have to click on the "Log in" button.
Some notes on using the Administrator account:
The recently released Windows 10 operating system has advanced security features that keep the operating system secure and eliminate many threats. To protect the system as much as possible, the developers have disabled extended rights, thanks to which third-party software has more access to system resources. For example, a self-compiled program for reading a database that is not signed with any certificate will run with limited access rights... To enable full access in the system administrator account, we will describe the various ways in which the administrator gains extended rights to manage the system.
The first way to get admin rights is pretty simple. First of all, you need to log into Windows 10 with an account that has administrator rights.
Let's try to run the WordPad program built into the extended operating system. To do this, using the keyboard combination Win + Q, go to the search for Windows 10 and type the phrase "WordPad" in it.
Now let's click on the resulting result with the right mouse button. In the context menu that opens, find the item " Run as administrator". After completing this step, we will launch the WordPad program in advanced admin mode.
Similarly, the application can be launched through the menu " Start"In the" All Apps"And launch it through the context menu, as shown in the image below.
If you want to run a program with extended permissions, which is located on the Desktop, then feel free to go to the shortcut menu and select the item responsible for run as admin.
Also if you go to Shortcut properties and press the button " Additionally", You can set the automatic launch of the utilities with administrator rights. For example, the image below shows an example of setting up a text editor for Notepad ++ programmers.
Another way to run the WordPad utility with elevated privileges is to run it in command line with admin rights... To do this, launch the console in this way - click on the icon “ Start"Right-click and select the item that is responsible for launching with administrator rights. Now let's execute the write command in the console. After that, our text editor will start with elevated rights.
For the second method, we also need a command line that runs with administrator rights. We also go to an account that has admin rights. Then we go to Windows 10 search and we type in it the phrase "CMD", which is responsible for finding the console.
Click the button on the found result and select the item that will launch our console with extended rights. In the running console, run the command shown below.
By running this command, you will give your account extended rights and will be able to run utilities without any restrictions. You can perform the reverse operation in the console and revert all changes by changing the word “ Yes" on " No.».
In this method, we will also launch the console with admin rights and execute the command shown below in it.
After executing this command, the system add-in "" will start. You can also include this add-in in Control panels if you don't like using the console.
In the open add-in, click on the following links: “ Local Policies/ Security options/ Accounts: Account status ‘Administrator’"And put the switch in the opened parameter in the position" Turn on».
By completing these steps, you can become a user with full access rights on the system.
Let's start the console in the same way as in the first example and execute the lusrmgr.msc command in it
This command will launch an add-on that allows manage users operating system Windows 10. The add-in can also be found and enabled in the Control Panel.
In the open add-in, find the section " Users"And find the user" Administrator". After opening this user, check the box " Disable account»As shown in the image below.
Now restart your pc and log in as the user for whom we performed these steps.
After completing these operations, you can become a user with full access rights in the system as in the previous example.
Let's run the command line for the fifth time with admin rights and execute the following command control userpasswords2
Also, this command can be executed in a program that is launched by the Win + R key combination.
This command will allow us to launch a window in which we can manage user parameters. The window will open on the first tab “ Users". To complete the task, we need to go to the tab " Additionally».
On this tab, click the Advanced button, which will transfer us to the familiar add-on from the previous example. Therefore, we perform all the actions as in the previous example.
In the sixth method, we will describe the launch of programs with extended privileges as a regular user. Therefore, we will go to a user account that has customary rights... Our next step will be to launch the Notepad ++ program through the context menu of the shortcut on Desktop... This startup method is described in the first example. If we run Notepad ++ using this method, the OS will ask us for the password of one of the system administrators.
Therefore, we will enter the required password and run Notepad ++ with extended privileges.
As you can see from the example, we launched the Notepad ++ text editor from under the usual account. The only thing to keep in mind in this example is that without the admin password, you won't be able to use this method.
As you can see from the examples, it is not difficult to run an application with elevated privileges and make yourself an admin with advanced features. But before giving your account extended privileges, it is worth considering safety factor.
Judge for yourself, it's not for nothing that the developers of Windows 10 limited the capabilities of the administrator account. The main factor behind this limitation is the execution of top ten malicious code that can damage system files operating system. That's why be extremely careful when trying to become an elevated admin.
And we, in turn, hope that our material will help to give our readers an answer to their tormenting question - how to get administrator rights in Windows 10 and will solve many problems.
